Rome Stale Fish Snowboard

The Men’s Stale Fish snowboard is designed for guys who enjoy the piste but are eager to find fresh lines when there has been a powder dump. Its directional shape is created through a tapered tail and a wide 3D shapes nose that lifts and glides over the powder. The versatile Pop core is sandwich between a layer of Triax and Biax fiberglass to create a responsive board that still feels playful underfoot. Finished off with a sintered base the Stale Fish is super tough and provides speed to get you out of sticky situations.

Features:

• Men's snowboard
• Terrain type: All mountain and powder
• Rider ability: Intermediate
• Flex: 7/10 flex rating provides a balance between pressable and power
• Shape: Directional shape with a 20mm setback, creating a longer nose compared to the tail. As a result your weight is shifted towards the tail adding lift and float in the nose for riding over powder
• Directional diamond 3D shape nose reduces edge catch and helps you to initiate turns
• Profile: Free the ride Camber hybrid profile with a setback camber and rocker in the nose, idea for all mountain riding
• Rocker at the nose of the board enhances float whilst camber towards the tail adds pop, power and stability
• Construction:
• Core: Pop Core is highly versatile made with a blend of poplar and paulownia, these alternating strips are 20mm wide and run the full length of the board
• Bamboo Omega Hotrods: A single bamboo rods sit through the centre of the nose adding power and response
• Each bamboo rod is surrounded by carbon to add additional power and response without impacting the overall weight
• Fiberglass: Fiberglass blend using Triax above the core and Biax below the core
• Triax fiberglass sits along the top of the core adding torsional stiffness for response and snap
• Biax fiberglass sits underneath the core is more flexible to give the board a playful feeling
• Base: Sinterstrong base retains wax deep into its pours create a high speed base that fly's over flats and through sticky crud
• NEW! Flax Walls: Flax Walls are designed to add rigidity and strength to the board, placed from the front insert through to the tip of the nose