Core: Multilayer woodcore combining Poplar and Beech
Base: P-Tex 2100
3 radius sidecut
Bindings not included: Marker Jester 90 and Griffon 90 are recommended bindings
The Kendo 88 is designed for guys to love to escape from the busy piste and find freedom in the powder, catered towards advanced skiers the Kendo 88 is packed with power and speeds. One of the standout features of this ski is the 3 radius sidecut whilst allows you can make long sweeping turns or short and tight turns. The addition of a titanal frame increase the ski durability whilst keeping the weight to a minimum.
Rocker profile features rocker in the tip and tail to give the ski increased lift in powder and makes the ski easier to manoeuvre. Rocker at either end of the ski shortens the contact length with the snow making turns easier.
Multilayer wood core uses both beech and poplar wood. By placing a beech hardwood in the binding area, the strength of the ski is increased whilst poplar light wood throughout the rest of the ski keeps the weight to a minimum.
Titanal frame wraps around the tip and tail to increases the amount of power in your edges. A titanal plate sits under the mounting point to strengthen the ski in the highest impact zone. Titanal frame provides damping over the full length of the ski for a smoother ride.
Carbon tip keeps the tip of the ski lightweight yet highly durable.
Full sidewall runs the full length of the ski to drive power from the centre of the ski to the tips.
3 radius sidecut uses 3 radii on one ski to give you maximum turning ability and speed versatility. Long tip and tail radius allows you to make big turns at high speeds whilst a tight centre radius allows you to make quick and short turns at low speeds.
Product Sizing Chart
Subscribe to Surfdome